Dips: how to do them and how many you should manage

Dips are a bodyweight pushing exercise: you hold yourself up on 2 parallel bars with straight arms, lower your body by bending your elbows, and press back up. They train the chest, the triceps and the front of the shoulders, and you lift close to your whole body weight on every rep. Grip the bars about shoulder width apart and keep your shoulders down, away from your ears. Lower until your upper arms are about level with the floor, or a little less if your shoulders complain.

Trains
Chest, triceps, front shoulders
Equipment
Parallel bars or a dip station, a dip belt for added weight
Level
Intermediate, with assisted versions to start
First cue
Shoulders down, then lower until your upper arms are level

Muscles dips work

Dips work the chest (pectoralis major), the triceps at the back of the upper arm and the front of the shoulder (anterior deltoid). The serratus anterior on your ribs, the trapezius and the lats hold your shoulder blades steady.

Most of this comes from studies that measure electrical activity with skin sensors (EMG). EMG shows which muscles fire, not which ones grow. In 13 experienced men, the bar dip worked 6 muscles harder than the bench dip, where the feet stay on the floor. The chest, the front of the shoulder and the triceps were among them, and the triceps worked about a quarter harder on the bars. In 15 men who did one set of bar dips to failure, the chest and the triceps both worked harder in the last 3 reps.

No study we found has measured muscle growth from dips. Strength has been measured: in a study of 30 male college gymnasts, 6 weeks of heavy dips, pull-ups and shoulder presses raised their dip max more than gymnastics training alone. The heavy sets were 3 sets of 10 at 75% of their max.

Muscles worked

Main muscles

Chest, Triceps

Helping muscles

Shoulders

How to do dips

  1. Stand between the bars, or on a box between them. Grip the bars about shoulder width apart, thumbs wrapped around.
  2. Step or jump up until your arms are straight. Lock your elbows before you start.
  3. Pull your shoulders down, away from your ears. Bend your knees and cross your ankles if the bars are low.
  4. Lower your body by bending your elbows. Keep your elbows pointing back, not out, and let your chest tip forward a little.
  5. Stop when your upper arms are about level with the floor, or higher if your shoulders feel strained.
  6. Press back up until your arms are straight again, with your shoulders still down.
  7. Breathe in on the way down and breathe out as you press up.

Lower in about 2 seconds, the pace one study set with a metronome. If you drop into the bottom or bounce out of it, pick an easier version from the variations below.

Chest dips or triceps dips?

Both muscles work on every dip. The usual coaching is a forward lean for the chest and an upright body for the triceps. That idea comes from the mechanics of the movement. No study we found has compared the 2 on the bars.

VersionHow you do itWhat you notice
Chest dipLean forward, let your elbows travel back, go down until your upper arms are about flatMore stretch across the chest at the bottom
Triceps dipKeep your body upright, elbows close to your sides, finish with straight armsMore work at the back of the arms, usually less depth

How people lean on their own. In the fatigue study, the 15 men chose their own technique on a V-shaped bar. At the bottom, their upper body leaned about 37 degrees forward. On the bench dip, men in the other study leaned only about 13 degrees, because the bench keeps the body upright. A moderate forward lean is the natural way to dip on bars. The authors explain that the lean supplies part of the depth, so less of it comes from the shoulder moving back.

Depth. One study tested 10 men who dipped upright with their elbows close. They paused at the bottom for 1 second with their elbows bent to 75, 85 or 95 degrees. Chest activity did not differ between the 3 depths. In the pause, the long head of the triceps worked hardest at the shallowest depth: 32% of its maximum, against 19% at the deepest. While moving, the depths did not differ. All 3 were shallower than the roughly 115-degree elbow bend the men in the fatigue study chose.

Grip. The dip researchers think a wide grip, added weight or fatigue may raise the risk of tearing the chest tendon. Nobody has measured it.

Pick the lean that feels best on your shoulders and keep it from set to set.

Where the advice differs

Most dip technique is coaching habit. Here is where the advice you hear in the gym disagrees.

QuestionWhat to doWhy, and when it changes
Lean forward or stay upright?A moderate forward lean for most peopleNo study compares the muscle work. Men dipping on their own leaned about 37 degrees. The lean supplies part of the depth, so the shoulder travels less far back.
How deep?Upper arms about level with the floorChest activity was the same at elbow bends of 75 to 95 degrees in 10 men. No study has tested deeper dips. Deeper takes the shoulder further back, the position the dip researchers call vulnerable.
Elbows in or out?Pointing back, close to your sidesNo study has tested it on the dip. Flared elbows usually come with a wide grip.
Go to failure?Stop 1 or 2 reps short on most setsIn the fatigue study, 2 of the 4 men who failed a rep sank past the shoulder range they reached in a supported test.
When to add weight?When 3 sets of 10 to 12 clean reps feel steadyThe rep target is coaching habit, not a study result.

Common mistakes and how to fix them

MistakeFix
Shoulders shrugged up to your ears at the bottomPull your shoulders down before each rep and stop a little higher
Dropping into the bottom and bouncing outLower in about 2 seconds and pause briefly before you press
Going deeper every rep as the set gets hardPick a depth, keep it, and end the set when you cannot reach it
Elbows flaring out to the sidesNarrow your grip and point your elbows back
Swinging your legs to get upCross your ankles, brace your trunk and use an easier version
Dropping off the bars from the bottom of a failed repPut your feet down on a box, or step down from straight arms

Sets, reps and rest for dips

There is no single right number. The table is a starting point built on the research on lifting in general. None of these studies tested the dip on its own.

GoalReps per setSetsRestHow hard
Starting out5 to 10, assisted if needed2 to 31.5 to 2 minutesStop 2 to 3 reps short of failure
Strength3 to 6, with added weight3 to 52 to 3 minutesStop 1 to 3 reps short of failure
Muscle6 to 15Enough for 10 or more chest sets a week1.5 to 3 minutesStop 1 to 2 reps short of failure

On Strength Level, a site where lifters log their sets, 3 sets of 10 is the most logged dip workout: 17% of men’s and 18% of women’s.

What the studies show:

  • Heavy weights build more strength. Muscle grows about as well with light or heavy weights, if the sets go close to failure.
  • More weekly sets bring more muscle, up to a point. A 2026 review of 67 studies found that a set for a helping muscle counts best as half a set.
  • With the same weekly sets, training a muscle more often does not add size.
  • You do not need to reach failure. On dips, a failed rep leaves you at the bottom, where your shoulder is stretched furthest.
  • Rest longer before heavy sets. Rests of 3 minutes built more strength than 1 minute in trained men. For muscle size, rests past 90 seconds made little further difference.

For longer answers, read how many sets and reps build muscle and how long to rest between sets.

Warm-up sets before dips

Before testing, the dip researchers had their men do 15 arm swings, 10 push-ups and 5 rows. After that, do 5 easy dips, with band help if needed. Before weighted sets, add a set of 3 to 5 reps at about 80% of your working added weight.

Only the 80% set has some study support, and not on the dip. In 2 studies of the bench press, the squat and the leg press, a warm-up set at about 80% of the working weight helped the sets that followed more than lighter warm-ups did. A third found that the kind of warm-up made no difference. A review of 31 upper-body warm-up studies found none that tested whether warming up prevents injury. The rest is habit.

After bench presses earlier in the session, one easy set of dips is usually enough.

How many dips should you be able to do?

There is no strong standard. We could not read any published scoring table for dips, and the studies test small groups of young men. The one large table comes from what gym app users log, with no check on depth.

Strength Level builds its dips table from 2,162,628 lifts its users logged from 2016 to 2026. After checks for implausible, duplicate or automated entries, 517,475 results remained: 489,613 from men and only 27,862 from women. It lists the reps in one set with body weight:

LevelStronger thanMenWomen
Beginner5% of its users3 repsunder 1
Novice20%10 reps1 rep
Intermediate50%20 reps9 reps
Advanced80%31 reps18 reps
Elite95%43 reps29 reps

"Under 1" means a single full dip already puts a woman past the beginner line. The table also scales with body weight. For an 80 kg man, its levels start at 3, 10, 20, 31 and 42 reps. For a 60 kg woman, they start at under 1, 1, 9, 19 and 29.

Strength Level also lists a one-rep max (1RM, the most weight you can lift once) as weight added on a belt. Its intermediate line is 49 kg (108 lb) added for men and 17 kg (37 lb) for women.

What the studies found:

  • 15 men who did dips every week averaged about 25 reps to failure on a V-shaped bar.
  • Those authors note that 54 college lacrosse players in a 2014 study averaged about the same.
  • In 38 young men, dip counts were closely linked with pull-up and push-up counts.

So for a man who has trained a while, 10 to 20 clean dips is a sound target. For a woman, 1 full dip is past the beginner line and 9 sits in the middle. Treat all of these as a rough guide.

Under 18? The table is for adults and sets no target for teenagers. Clean reps and steady progress matter more than any number on it.

Trackist’s own table below works differently. It shows where each level starts as a one-rep max, for ages 18 to 29. On a dip, the 1RM is your body weight plus the most weight you can add for one rep. They are the same standards the strength calculator and the app use.

Trackist scores the chest dip in one pushing group with the bench press, the overhead press and push-ups. They all meet the same lines. With nothing added, the app estimates your max from your reps and your body weight, and counts up to 12 reps. That makes bodyweight reps score high. A figure under your body weight means that level starts before one full rep. At 80 kg of body weight and age 18 to 29, 12 dips read as 1.40 times body weight: Intermediate for a man, Elite for a woman. Read the table as a guide to weighted dips, not as a verdict on your reps.

Dip standards by body weight (body weight plus added weight)

Estimated one-rep max where each level starts, ages 18 to 29.

Men

Body weightBeginnerNoviceIntermediateAdvancedElite
60 kg130 lb30 kg65 lb45 kg100 lb60 kg130 lb90 kg200 lb120 kg265 lb
70 kg155 lb35 kg75 lb52.5 kg115 lb70 kg155 lb105 kg230 lb140 kg310 lb
80 kg175 lb40 kg90 lb60 kg130 lb80 kg175 lb120 kg265 lb160 kg355 lb
90 kg200 lb45 kg100 lb67.5 kg150 lb90 kg200 lb135 kg300 lb180 kg395 lb
100 kg220 lb50 kg110 lb75 kg165 lb100 kg220 lb150 kg330 lb200 kg440 lb
110 kg245 lb55 kg120 lb82.5 kg180 lb110 kg245 lb165 kg365 lb220 kg485 lb
120 kg265 lb60 kg130 lb90 kg200 lb120 kg265 lb180 kg395 lb240 kg530 lb

Women

Body weightBeginnerNoviceIntermediateAdvancedElite
50 kg110 lb15 kg35 lb22.5 kg50 lb32.5 kg70 lb45 kg100 lb60 kg130 lb
60 kg130 lb17.5 kg40 lb27.5 kg60 lb40 kg90 lb55 kg120 lb72.5 kg160 lb
70 kg155 lb20 kg45 lb32.5 kg70 lb45 kg100 lb62.5 kg140 lb85 kg185 lb
80 kg175 lb25 kg55 lb35 kg75 lb52.5 kg115 lb72.5 kg160 lb95 kg210 lb
90 kg200 lb27.5 kg60 lb40 kg90 lb57.5 kg125 lb80 kg175 lb107.5 kg235 lb
100 kg220 lb30 kg65 lb45 kg100 lb65 kg145 lb90 kg200 lb120 kg265 lb

From your first dip to added weight

You make dips harder in 3 steps, in this order: more reps, a harder version, then added weight. Most of this is coaching practice.

If you cannot do a dip yet, start with one of these:

  • An assisted dip machine, where a pad under your knees or feet takes part of your weight. Take less help as you get stronger.
  • A band looped over the bars under your knees. It helps most at the bottom, where the dip is hardest.
  • Dips with your feet on the floor and the bars at waist height. Your legs take as much weight as you need.
  • Negatives: jump to straight arms and lower yourself slowly, over 3 to 5 seconds.

The dip researchers suggested the first 3, but no training study has tested any of them. Once you manage 3 sets of 10 to 12 clean dips, move to rings or add weight with a dip belt and a plate, or a weighted vest. Start with 2.5 to 5 kg (5 to 10 lb) and drop back to about 6 to 8 reps. Progressive overload explains the idea behind each step.

Find your dip max

Start with a max reps test. Come in rested, warm up, and count only full reps: straight arms at the top and the same depth every time. As you tire, reps slow down and get shorter. In the fatigue study, the time per rep went from 1.35 to 2.24 seconds, and each rep travelled about 4 cm less.

Once you dip with added weight, you can test a heavy single. The gymnast study did it this way: warm up, start at about 80% of the expected max, rest 5 minutes, then add 2.5 to 10 kg per attempt. Each rep went down to a 90-degree elbow and up to straight arms. Retested 48 hours later, the results came out almost the same.

You do not need to test a true max: the calculator estimates one from a set. It has no field for body weight, so type your body weight plus the added weight as the weight. Subtract your body weight from the result to get your added-weight max. For example, an 80 kg lifter who does 6 dips with 20 kg on a belt types 100 kg and 6 reps.

Read the result as a rough guide. Rep formulas were built on loaded lifts such as the bench press. One study of the bench press and the leg press advised using no more than 10 reps in such formulas. So the estimate gets rougher past about 10 reps. For more detail, open the 1RM calculator.

Your set

A recent hard set, where you could not have done another rep.

Units
kg

Your estimated 1RM: 116.7 kg.

Your estimated 1RM

116.7kgBy the Epley formula

The 7 formulas give 112.5 to 119 kg.

Each formula

  • Epley116.7 kg
  • Brzycki112.5 kg
  • Lander113.7 kg
  • Lombardi117.5 kg
  • Mayhew119 kg
  • O’Conner112.5 kg
  • Wathen116.6 kg

Watch your max climb

Trackist estimates your max from the sets you log

This page reads one set. The app reads the loaded sets you log and, from your second session, charts your estimated one-rep max on the exercise’s page.

  • A chart of your estimated 1RM on the exercise page, from your second session
  • A personal record when you beat your best estimated 1RM
  • A suggestion for your next session, from the sets you logged last time
Download Trackist on the App Store

Percentages of your 1RM

From your estimated 1RM above.

% of 1RMWeight
100%116.7 kg
95%110.8 kg
90%105 kg
85%99.2 kg
80%93.3 kg
75%87.5 kg
70%81.7 kg
65%75.8 kg
60%70 kg
55%64.2 kg
50%58.3 kg

Your rep maxes

The weight for each number of reps, by the Epley formula.

RepsWeight
1116.7 kg
2109.4 kg
3106.1 kg
4102.9 kg
5100 kg
697.2 kg
794.6 kg
892.1 kg
989.7 kg
1087.5 kg
1185.4 kg
1283.3 kg

Shoulders, the breastbone and getting on and off the bars

The dip researchers call the bottom of the dip, with your arm far behind your body, a vulnerable position for the shoulder.

Depth at the bottom. Before dipping, each man in the 2 studies lowered himself as far as he could with his feet on the floor. That gave the range his shoulder would accept. On the bars, the 13 men used 88% of that range, and the 15 men in the fatigue study used 76%. On the bench dip, they went past it, to 101%. On the rings, they used 69%. Fatigue did not make the men go deeper, but 2 of the 4 who failed a final rep sank past their tested range. So keep a depth your shoulder accepts, and end the set before the rep that sinks.

The chest tendon and the breastbone. Tears of the chest muscle are rarely reported on bar dips: the dip researchers found only 2 case reports, and one involved weighted dips. Another case report describes a stress fracture of the upper breastbone in a young recruit who dipped with a grip wider than his shoulders. No study has looked at the everyday ache some people feel on the breastbone at the bottom of a dip.

Getting on and off. Step up from a box and lock your arms before you lower. To finish, press to straight arms and step down onto the box, slowly if a plate hangs from your belt. On rings, falling is the main risk, as the dip researchers point out. The rest is coaching practice, not a study result.

Up to 36% of the injuries recorded in weight training are at the shoulder, so take a sore shoulder on dips seriously early.

When dips hurt

Pain is a reason to change something, not to push through. Diagnosis and treatment belong to a physiotherapist or a doctor.

  • Front of the shoulder: stop higher and narrow your grip. Use band or machine help for a few weeks, or swap dips for push-ups or the bench press.
  • Breastbone or the middle of the chest: narrow your grip, go less deep and take off any added weight.
  • Elbow: slow the lowering, drop the added weight and keep your elbows pointing back.
  • Wrist: keep your wrists straight, stacked over your forearms, and try thicker or angled handles.
  • A pop, sudden weakness or bruising in the chest or armpit needs a doctor soon.
  • Numbness, tingling or weakness down an arm needs a doctor soon.

For lasting pain, read what to do when a lift hurts.

Dip variations and alternatives

VariationWhat it changes
Assisted dip machineA pad takes part of your body weight before you can do a full dip.
Band-assisted dipA band helps most at the bottom, where the dip is hardest.
Negative dipYou jump to straight arms and lower slowly, over 3 to 5 seconds.
Weighted dipA plate on a dip belt, or a weighted vest. You add weight in steps of 2.5 kg (5 lb) or less.
Ring dipThe rings move, so you steady them. The chest, the lats and the biceps worked harder than on bars, and the shoulder moved through a smaller range. The dip researchers name falling as the main risk.
Bench dipHands on a bench behind you, feet on the floor. Less load, but the shoulder went past its tested range. The dip researchers advise against it as a regular exercise.
Push-upA floor press with no bars needed. The bodyweight home plan, made for a home without bars, uses push-ups and pike push-ups.
Bench pressA barbell press lying on a bench. It trains the same muscles, and you can add weight in small steps.

In Trackist’s exercise library, the chest dip sits in one group with 8 other horizontal presses: the barbell bench press, the dumbbell bench press, the machine chest press, the Smith machine bench press, the push-up, the decline bench press, the incline push-up and the ring dip. The app’s chest dip page lists them as similar movements. When you swap dips for one session or for the rest of your plan, the picker puts that group first, then other chest exercises, starting with those your equipment and joints allow. The triceps dip and the bench dip sit with the triceps exercises.

How Trackist runs your dips

Trackist is an AI personal trainer for the gym. It logs the dip with a forward lean as the chest dip, and the chest dip gets this from the app:

  • You log your reps and only the weight you add, in the +kg column. Your body weight comes from your latest weigh-in, so you leave the weight empty for a set with nothing added. If you type a weight as heavy as your body, the app asks whether you counted your body by mistake.
  • From your second session of dips, Trackist suggests what to try from the last time you logged them. Inside the rep range, it asks for more reps. When every set reached the top of the range with nothing added, it suggests your first plate: 2.5 kg (5 lb). With weight added, it adds another 2.5 kg (5 lb) each time you reach the top. There is no suggestion in a deload week.
  • When you fall short with weight added, it keeps the added weight, suggests about 5% less rounded to the nearest 2.5 kg (5 lb), or leaves the call to you, depending on how far short you fell and how hard the sets felt. Up to about 25 kg added, that rounding often lands on the same weight. With nothing added, it leaves the call to you.
  • From your second session, it logs a personal record when you beat your heaviest added weight, your most reps or your best estimated max. The estimated max counts your body weight plus the added weight.
  • The exercise page shows 4 form cues, the muscles worked and the joints the dip loads: the shoulders and the elbows. From your second session, it adds a chart of your estimated one-rep max.
  • When your shoulder hurts on dips, you report it and rate it from 1 to 5. The only chest exercise in the library that spares the shoulder is the Svend press, where you squeeze a plate or a dumbbell, so Trackist offers it or picks from the exercises your profile still allows. Your profile remembers that pressing hurts the shoulder, so later plans leave out bench presses, push-ups, dips, flyes, overhead presses and raises. Rows and pull-ups stay.
  • When your elbow hurts on them, Trackist swaps them for a press that spares the elbow, such as the incline push-up, the push-up or the machine chest press. Later plans leave out barbell and dumbbell presses, dips and triceps work. Push-ups, machine presses, pulls and curls stay.
  • When your lower back hurts on them, Trackist swaps them for another press, such as the decline bench press. The app stores the lower back as a whole, so later plans leave out every movement that loads it: barbell squats, deadlifts, bent-over rows, crunches, planks and carries. Dips stay.
  • Your chest dips count towards your Strength Score in the pushing group, with the same standards as the table above, adjusted for your age. Trackist counts your body weight on the day of the set plus the added weight. Triceps dips are a separate exercise and do not count towards the score, though their records also count your body weight.

FAQ

Questions, answered.

What muscles do dips work?

The chest, the triceps and the front of the shoulders, with the serratus anterior, the traps and the lats holding the shoulders steady. In 13 experienced men, bar dips worked 6 muscles harder than bench dips, the chest and the triceps among them.

Are dips better for the chest or the triceps?

Both work on every rep. A forward lean is the usual cue for the chest and an upright body for the triceps, but no study has compared them. Men dipping on their own leaned about 37 degrees forward. Pick the lean that feels best on your shoulders.

How many dips should I be able to do?

There is no strong standard. On Strength Level’s table, built from lifts its users log, the middle of the field is 20 reps for men and 9 for women. In a study of 15 men who dipped every week, the average was about 25.

How deep should you go on dips?

Until your upper arms are about level with the floor, or higher if your shoulders feel strained. In 10 men, elbow bends of 75 to 95 degrees made no difference to how hard the chest worked. No study has tested deeper dips, which take your shoulder further back.

Are dips bad for your shoulders?

Not for most people, if you control the depth. On bars, men used 76% to 88% of the shoulder range they reached with their feet on the floor. The risks are the last failed rep, which can sink deeper, and bench dips, which went past that range.

How do I get better at dips if I cannot do one?

Use an assisted dip machine, a band under your knees, dips with your feet on the floor or slow negatives. Take less help as you get stronger. No training study has tested these on dips.

When should I add weight to dips?

When 3 sets of 10 to 12 clean dips feel steady. Hang 2.5 to 5 kg (5 to 10 lb) from a dip belt and start again at about 6 to 8 reps.

How many sets and reps of dips should I do?

Starting out, 2 to 3 sets of 5 to 10 reps, with help if needed. For muscle, sets of 6 to 15 reps stopped a rep or 2 short of failure. For strength, 3 to 5 sets of 3 to 6 reps with added weight. Rest 1.5 to 3 minutes between sets.

Sources

The studies and rules this page draws on. Where the evidence is thin, the text says so.

  1. McKenzie A and others (2022). Bench, bar, and ring dips: do kinematics and muscle activity differ? International Journal of Environmental Research and Public Health.
  2. McKenzie A and others (2022). Fatigue increases muscle activations but does not change maximal joint angles during the bar dip. International Journal of Environmental Research and Public Health.
  3. McKenzie A and others (2021). Glenohumeral extension and the dip: considerations for the strength and conditioning professional. Strength and Conditioning Journal.
  4. Çınarlı FS and others (2021). Effect of elbow angle on triceps brachii and pectoralis major muscle activity during parallel bar dip. Kinesiologia Slovenica.
  5. Vigotsky AD and others (2017). Interpreting signal amplitudes in surface electromyography studies in sport and rehabilitation sciences. Frontiers in Physiology.
  6. Li A and others (2026). Effects of low-load blood flow restriction vs. high-load resistance training on upper-body strength in male collegiate gymnasts: a randomized controlled trial. Journal of Exercise Science and Fitness.
  7. Thomas E and others (2021). Upper body strength endurance evaluation: a comparison between the handgrip strength and three body weight tests. Isokinetics and Exercise Science.
  8. Collins SM and others (2014). The relationship between body composition and preseason performance tests of collegiate male lacrosse players. Journal of Strength and Conditioning Research.
  9. Strength Level. Dips standards (user-logged lifts, read 14 November 2026).
  10. Reynolds JM, Gordon TJ and Robergs RA (2006). Prediction of one repetition maximum strength from multiple repetition maximum testing and anthropometry. Journal of Strength and Conditioning Research.
  11. Currier BS and others (2026). American College of Sports Medicine position stand: resistance training prescription for muscle function, hypertrophy, and physical performance in healthy adults. Medicine and Science in Sports and Exercise.
  12. Schoenfeld BJ and others (2017). Strength and hypertrophy adaptations between low- vs. high-load resistance training: a systematic review and meta-analysis. Journal of Strength and Conditioning Research.
  13. Pelland JC and others (2026). The resistance training dose response: meta-regressions exploring the effects of weekly volume and frequency on muscle hypertrophy and strength gains. Sports Medicine.
  14. Schoenfeld BJ, Grgic J and Krieger J (2019). How many times per week should a muscle be trained to maximize muscle hypertrophy? Journal of Sports Sciences.
  15. Refalo MC and others (2023). Influence of resistance training proximity-to-failure on skeletal muscle hypertrophy: a systematic review with meta-analysis. Sports Medicine.
  16. Schoenfeld BJ and others (2016). Longer interset rest periods enhance muscle strength and hypertrophy in resistance-trained men. Journal of Strength and Conditioning Research.
  17. Singer A and others (2024). Give it a rest: a systematic review with Bayesian meta-analysis on the effect of inter-set rest interval duration on muscle hypertrophy. Frontiers in Sports and Active Living.
  18. Viveiros L and others (2024). High-load and low-volume warm-up increases performance in a resistance training session. Journal of Bodywork and Movement Therapies.
  19. Ribeiro B and others (2020). The role of specific warm-up during bench press and squat exercises: a novel approach. International Journal of Environmental Research and Public Health.
  20. Ribeiro AS and others (2014). Effect of different warm-up procedures on the performance of resistance training exercises. Perceptual and Motor Skills.
  21. McCrary JM, Ackermann BJ and Halaki M (2015). A systematic review of the effects of upper body warm-up on performance and injury. British Journal of Sports Medicine.
  22. Carek PJ and Hawkins A (1998). Rupture of pectoralis major during parallel bar dips: case report and review. Medicine and Science in Sports and Exercise.
  23. Demir Benli M (2023). Stress fracture of the manubrium sterni during parallel bar dips. The Physician and Sportsmedicine.
  24. Kolber MJ and others (2010). Shoulder injuries attributed to resistance training: a brief review. Journal of Strength and Conditioning Research.

5.0 ON THE APP STORE · NO ADS

Let Trackist plan your next session

Answer 14 questions and Trackist writes a plan around your gym and your week. Log your sets, and from your second session it suggests what to lift next. On the App Store now. Android is coming.

Download Trackist on the App Store
ANDROIDComing soon